How to use stainless steel j bolts

1. Installation steps Step 1: Confirm the installation location According to the load-bearing requirements of the equipment or shelves, select a flat and solid ground and mark the installation points of the feet. Make sure the ground is clean and dry to avoid oil or debris affecting stability. Step 2: Adjust the height Insert the J-shaped feet into the holes of the equipment base and adjust the height by rotating the anchor bolts (some models have adjustment nuts). Use a level to calibrate the equipment to ensure that each support point is evenly stressed. Step 3: Fix and test Tighten the anti-slip nuts or locking washers at the bottom of the feet to prevent loosening during use. Gently shake the equipment to check stability and install rubber pads if necessary (anti-slip/shock-absorbing models need to fit the ground).

stainless steel j bolts  applicable scenarios

Industrial equipment: machine tools, production line brackets, storage shelves. Commercial facilities: supermarket shelves, display cabinets, laboratory tables. Outdoor scenes: 316 stainless steel is required to resist salt spray corrosion.